Kobold flash replacement top
This is an aluminium replacement top part for the Kobold flashes. It is used specifically for the Luke severed hand saber where the knurling was removed on the Kobold flash. This can be used to avoid damaging the vintage flash and also if you don't want or feel confident modifying your flash yourself :-)
Original kobold parts, graflex parts or actual lightsaber not included!
1 aluminium 40mm replacement cap, 2 M3 holes in the bottom to attach to the flash with its original screws. 1 M3 set screw to tighten the part if using a WannaWanga red printed insert part. Reproduced from direct measurement from an accurate part :-)