Lando comlink conversion kit

What is included in the kit :

- Resin printed black coin slot bezel part. Quickly sanded, needs a more precise sanding for a perfect result.

- Polished aluminium round bezel

- Polished aluminium top cup and thin bar

- Vintage Dansette radio mesh. Just needs to be bent into the printed bezel for installation. Can be shortened a bit depending on the look you want.

- FREE switch blade part in case your vintage switch doesn't have an accurate part there. This is from the run with Ryan, They were drawn from a vintage switch but I discarted an entire run of those because they were slightly different from the screen-used version. The milled details are just a bit deeper than the screen-used version, but the look is really close. Again, just included for free in case you need them. Can benefit from a quick horizontal sand to get rid of the machining lines, at least on the visible face.

This is a conversion kit that requires some figuring out when using a vintage switch. The threaded hole at the top of the switch probably needs to be drilled to accomodate for the thin bar. screw at the end of the thin bar can be removed with pliers if you don't use the provided switch blade that has a threaded hole in it. Switch or printed bezel need to be modified in one spot in order to have a flush fit.

I was given this link from the Parts of sw master for people looking for a vintage part for the rubber part under the round bezel:

https://www.ebay.com/itm/272255037837

For additional parts like the clear top part, stickers, you can get in touch with Ryan Clinton on the RPF to ask if he has leftover parts from the run.

enjoy your build :-)