- Sold Out
DS green dome light FX
Green dome light with its polished aluminium bezel as used in several objects on the Death Star.
The lamps have been created after a careful study of the movie stills as well as photos of real found parts. A precise 3D model was then created to determine the most exact possible proportions and measurements.
This version of the lamps is sold with a pre-wired led with 20cm long wires, the led is fitted to a 8mm large bezel secured by a nut at the back. All you need to do is connect the wires to a max DC 12V power supply and drill 8mm holes in the object you want to attach them to.
The lamps are 45mm in diameter.
Each bezel is hand turned from aluminium then polished until looking like chrome.
The lenses are made of transparent and colored resin and sanded and polished to obtain the same transparency as the originals.
Each lens is precisely adjusted to its bezel and is not glued. It is possible to remove gently the lens from its bezel by using a piece of tape for instance but it is not necessarily easy to do so!
A 8mm hole is required to attach the lamp to the object you want thanks to the included nut.
The leds are intended for a power supply of max DC12V 20mA but their luminosity is good with weaker power too. The positive wire is black. The leds are obviously not made by me and no warranty is given regarding their life span or anything else. However, each led was tested during assembly :-)